Apache
$3,800
Upgrades Available

This is our second most popular model.  It comes equipped with an expanded metal wood box, firebox, reverse flow smoker barrel, vertical smoker/warming cabinet, and a propane burner.  This entire unit is built in house.  It has a square tube trailer frame that is sitting on a 3,500 pound axle.  The entire unit is painted with a high temperature paint rated for 1,000 degrees.  This unit requires a 2” ball and a standard 4 pole light hook up. 

 -Wood box – This component is constructed using ¾” #9 X metal.

-Smoker barrel - 62” long x 30” diameter (72” long upon request). This component is constructed using 1/4” steel (3/16” upon request).  Inside the barrel smoker is a diverter plate and two removable cooking grates.  The top cooking grate is 21 ½” deep x 56” long.  The bottom cooking grate is 28” deep x 56” long. The cooking grates are constructed using ¾” #9 X metal.  The smoker barrel also has a drain.

-Firebox - 20” tall x 20” wide x 24” deep. This component is constructed using 11 GA steel.  It has a permanent charcoal/wood grate.  This grate is constructed using ¾” #9 X metal. This allows you to build your fire up off the bottom of the firebox, allows air to move under your fire, and provides room for easy cleanout.

-Vertical Smoker/Warming cabinet – 42” tall x 18” wide x 20” deep. This component is constructed using 11 GA steel.  It has four removable cooking grates which are 17 ½” wide x 19” deep.  The cooking grates are constructed using ¾” #9 X metal.  Air flow to this component can be controlled using a metal sliding door.  The sliding door is between the barrel smoker and the vertical smoker/warming cabinet.  This metal door can be adjusted by using a metal rod that runs from the door to the outside of the smoker barrel.  This allows you to open and close the metal door without opening the barrel smoker.  Open it to use this component as a vertical smoker and close it to use this component as a warming cabinet.